TREND UNIBASE UNIVERSAL ROUTER BASE
TREND UNIBASE - ROUTER BASE ADAPTOR. ALLOWS OTHER MAKES AND MODELS OF ROUTER TO USE THE TREND GUIDE BUSHES FOR INCREASED DIVERSI
The Unibase enables routers with non-standard
guide bush fittings to accept the range of Trend guide bushes. It will
fit directly to most routers.
- Line-up pin used with a 16mm plastic bush to ensure concentricity of the cutter to the guide bush when fitting the sub-base.
- Suits collet sizes 1/4 inch, 8mm, 12mm and 1/2 inch.
- Instructions for fitting
- The line-up pin fit into the collet and is plunged through the
router base.
- The line-up bush is fitted into the Unibase and secured.
- This is then placed over the line-up pin and rotated in order to line up
the fixing holes.
- The Unibase screws are tightened and then the line-up
bush can be replaced with any choice of Trend guide bushes.
- These range from 10mm up to 30mm (GB10 - GB32). For larger diameter cutters a 40mm guide bush (GB40) is available.
