Contractor jig with interchangeable templates for use with a plunge
router to cut the mortise & face-plate for larger locks quickly
& accurately.
- Suitable for DDA (Disabilty Discrimination Act) lock size.
- 20mm x 235mm radius end face plate, 24mm x 235mm radius end face plate and 17mm x 170mm mortise.
- Adaptor plate included to allow smaller templates (239mm x 60mm) to be fitted (as supplied with standard LOCK/JIG).
- Suitable for doors 34mm to 58mm thick.
- An auger bit and drill is required to complete deep mortises.
- The jig requires a 1/2- inch plunge router with a 80mm plunge, fitted with a 30mm guide bush with 6mm spigot & 12mm diameter long reach cutter. A 1/4-inch plunge router can be used for the face plate but will not achieve full depth of mortise.
- Suits DIN style locks.
Includes:
- 1 x Guide bush collar
- 2 x Face plate template
- 1 x Mortise template
- 1 x Template adapter
- 6 x Spacer Fingers
