MAKITA HR4511C SDS MAX with AVT ROTARY DEMOLITION HAMMER DRILL in carry case - 110V
45MM SDS-MAX AVT ROTARY HAMMER
Makita HR4511 models have been developed as successor models of HR4500C, featuring low vibration level and high work efficiency.
The Makita HR4511C Hammer Drill fitted with a tough industrial high quality 1350W plus 45mm concrete capacity SDS- Max Chuck. It has 2 modes of operation: Rotary Hammer and Hammer Only.
It is fitted with an anti-vibration system for ultra-low vibration. It has a torque limiter so when drill hits reinforcement the torque limiter stops power and a recess change lever that is mounted on top of machine to reduce breakage even if machine is dropped or laid down carelessly.
The variable speed on trigger it control the Hammer Drill and easier to work with over extended working periods and jobsite conditions. The drill is double insulated for increased safety.
Features
- Soft start
- Torque limiter: The drill stops when the bit hits against reinforcements
- 2 mode: Rotary Hammer and Hammer Only
- Impact Energy- 9.4J
- Constant speed under load
- Double Insulation
- AVT (Anti vibration technology)
- Weight- 9.0 – 9.1 Kg
Comes with
- Side handle
- Depth stop
- Bit grease
- Carry case
