MAKITA HR3210C
SDS-PLUS 240V ROTARY HAMMER 32MM
The Makita R3200C
series models have been developed as successor models of HR3000C, featuring low
vibration level and lightweight design.
SDS-PLUS combination hammer for impact
drilling, drilling and chiselling.
Features
- Powerful 850W Combi hammer with low vibration values
- Ergonomically designed and good, rubber coated and secure grip
- 3 mode operation: Rotation only, Rotation and Hammering, Hammering
- Torque limiter: The drill stops when the bit hits against reinforcements
- Rotary
action with hammer support can be selected as can pure hammer-only action for
heavy-duty breaking and demolition work
- Only 10m/s² thanks to AVT (Anti-Vibration Technology)
- 5.0j** of hitting energy
- Torque limiter protects tool and operator if the bit should jam
- Variable speed by dial with constant speed control and soft start
- Built-in job light
- Anti
Vibration Technology (AVT) uses the pneumatic pressure generated in the hammer
piston chamber to move a counter balance in the opposite direction to dampen
out the impact vibrations at the steel point.
- This dramatically reduces machine produced vibrations
- 2-Mass fulcrum hinged rear grip handle and the vibration damping side handle to further limit HAV risks
Standard
- Side handle
- Depth stop
- Bit grease
- Carry case
