MAKITA DLS714NZ 190MM CORDLESS
TWIN 18V (36V) BRUSHLESS LXT SLIDE
COMPOUND MITRE SAW BODY
PLUS WST06 MITRE SAW STAND
Model DLS714 is a 190mm (7-1/2") cordless slide compound miter saw powered by two 18V Li-ion batteries in series, and the power is comparable to AC models.
Brushless 36v cordless mitre saw powered by 2x18v LXT Batteries, compact and lightweight and less maintenance.
The Makita DLS714Z cordless mitre saw has a large dimensional lumber cutting capacity, 52 x 300mm at 90 degrees and 52 x 212mm at 45 degrees, miters 0 to 47 degrees left and 0 to 57 degrees right, and bevels 0 to 45 degrees left and 0 to 5 degrees right.
Positive miter stops at 0, 15, 22.5, 30 and 45 degrees left and right.
Features
- Powered by two 18V Li-ion batteries in series to supply energy to the powerful 36V DC motor drive system.
- Brushless motor
- Double Sliding Mechanism
- Soft start
- Easy to Grip handle with anti-slip elastomer surface
- LED indicator panel for battery fuel and indication of automatic speed control
- Electric brake
- Equipped with Battery protection circuit: designed to protect the battery from damages due to overdischarge, high temperature or overload current.
- Cuts up to 300mm in a singe pass
Toolless Installation, Easy cutting with solid, Folding, removal of Makita Mitre Saw
- Easy to assemble
- Quick release (toolless) locking levers enable mitre saw to be quickly installed or removed without the need for additional tools
- Lightweight tubular aluminum construction folds quickly and easily for maximum jobsite portability
- Maximum extended width of up to 2550mm wide
- L: 1,150mm/2,550mm W:750mm H:850mm
- Adjustable levelling foot prevents stand from wobbling on uneven floors or ground
- Sliding rail design allows mitre saw to be repositioned with ease
- Carrying handle allows stand to be carried single-handedly when collapsed
- Transport wheels and handle allow stand to be transported around the jobsite with the mitre saw mounted
- Adjustable repetitive cut stop and material roller for ease of operation and increased jobsite efficiency
- On-board hex wrench storage allows operator to make necessary adjustments to mitre saw set plates
- 15.3kg total weight
- Trolley castors
The stand is applicable to ALL MAKITA MITRE SAWS
except for the following models: DLS600, LH1040/F and LH1201FL.
Technical Information
- Maximum Material Support Width- 2550mm
- Maximum Material Support Height- 970mm
- Maximum Supported Weight- 225 kg
- Dimensions (Open)- 1150 x 750 x 850 mm
- Dimensions (Collapsed)- 1270 x 270 x 250 mm
- Net Weight- 15.3 kg
- DLS714NZ Mitre Saw (Body Only)
- WST06 Mitres Saw Stand
- Batteries and Charger not Included.
