Makita 18V BRUSHLESS 6 PIECES
KIT WITH 3 x 5.0AH
BATTERIES,
CHARGER AND TOOL BAG
Comes with
- DHP486 Brushless Combi Drill
- DTD153 Brushless Impact Driver
- DHS680 Brushless Circular Saw
- DJV182 Brushless Jigsaw
- DGA463 Brushless Angle Grinder
- DML815 LED Flash Light
- 3 x BL1850 18V 5.0Ah Li-ion Batteries
- DC18RC Battery Charger
- 1 X XGT WHEELED TOOL BAG
DHP486 Brushless Combi Drill Features
The new DHP486z is 14% smaller than the
DHP481, measuring at 178mm x 81mm x 248mm. It’s more capable of fitting into
compact spaces.
- 18V LXT BL Brushless Cordless 13 mm, 130 N·m. Hammer Driver Drill
- Increased performance in continuous heavy-duty applications
- Increased max clutch torque enables to adjust clutch torque even when tighteningfasteners into hard material
- Compact and ergonomic design at only 178 mm long
- 0-31,500 IPM for fast hammer drilling in masonry materials
- Brushless motor delivers 130Nm of max torque
- Brushless motor is electronically controlled to optimize battery energy use for longer run time per charge
- Brushless motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life
- All metal variable 2-speed transmission (0-550 & 0-2,100 RPM) for a wide range of drilling, fastening and hammer drilling applications
- All metal gears and gear housing for maximum job site durability
- All metal 13 mm self ratcheting chuck for improved bit gripping strength and durability
- Lightweight for reduced operator fatigue
- 21 clutch settings and drill mode for added fastening control
- 3-stage LED gauge indicates battery charge level
- Extreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh conditions
- Twin LED lights with afterglow feature illuminate the work area
- Electric brake for maximum productivity
- Reversing switch is conveniently located
DTD153 Brushless Impact Driver Features
- T-mode: Tightening mode for self-drilling screw
- Electronic 3-stage impact power selection (Hard/Medium/Soft)
- Brushless motor
- One touch sliding chuck for easy bit installation and removal.
- LED job light
- Ergonomic soft grip
- Electric brake
- Variable speed control by trigger
- Forward/reverse rotation
- Compact overall length
DHS680 Brushless Circular Saw Features
- Automatic Speed Control: Automatically changes the cutting speed according to load condition for optimum operation
- Electric brake
- Soft start
- Electronic current limiter for overload protection
- Tool Hanger
- Twin LED job light
- Battery fuel gauge
- Rear dust exhaust port
- Large lock off lever
- Compact and lightweight design
- Ergonomic soft grip
- Blower function to clear wood dust from cutting line
- Larger base than current models for more stable operation
DJV182 Brushless Jigsaw Features
- New improved dust extraction hose joint
- Rigid aluminium base bevels 0 to 45 degrees left and right
- Change lever for 3 orbital settings and straight cutting
- Tool-less blade change
- Variable speed control dial
- Soft start feature
- "Soft no load" function automatically reduces the motor speed during idling to suppress the vibration of the machine body
- Blower function to clear wood dust from cutting line
- Trigger switch with lock-on button
- Ergonomic soft grip
- Twin LED job light
DGA463 Brushless Angle Grinder Features
- Electric Brake stops the grinding or cut-off wheel in 2 seconds or less for maximum productivity
- "Active Feedback sensing Technology" turns the motor off if rotation speed suddenly slows or wheel is forced to stop
- "Automatic Torque Drive Technology" adjusts speed and torque during operation for optimum performance
- The BL Brushless Motor eliminates carbon brushes, enabling it to run cooler and more efficiently for longer life
- Variable speed control dial allows manual RPM adjustment (3,000-8,500) to match the speed to the application
- Slide switch with lock-on for operator convenience
- Soft start suppresses start-up reaction for smooth start-ups and longer gear life
- Anti-restart protection engineered to prevent motor start up when battery is inserted with paddle switch in the on position
- Efficient Brushless motor is electronically controlled to optimise battery energy use for up to 50% longer run time per charge
- The electronically-controlled Brushless Motor efficiently uses energy to match torque and RPM to the changing demands of the application
- 3-stage L.E.D. gauge indicates battery charge level
- Spiral bevel gears for smoother rotations and a more efficient transfer of energy
- Removable wire mesh intake covers are engineered to prevent debris from entering motor
- Extreme Protection Technology (XPT™) is engineered for improved dust and water resistance for operation in harsh conditions
- Rubberised soft grip provides increased comfort on the job
- Compact and ergonomic design at only 382mm long
DML815 LED Flashlight Features
- High-luminance 4 x (0.5W) LEDs flashlight provides brightness of 160 lumens
- 12 position pivoting flashlight head with positive stops from 0º - 170º degrees
- Metal hang hook is convenient and job site durable
- Multi-faceted reflector controls the direction and spread of the light
- LED and provides a sharp, round spotlight
- Compact and ergonomic design at only 272 mm long
- Rubberized soft grip provides increased comfort on the job
- An ideal addition to any toolbox or workshop
BL1850 18V 5.0Ah Li-ion Battery Features
- 18v 5.0Ah Li-ion Battery
- LED battery indicator
- Unbeatable 45 minute charge time
- Same weight as 3.0Ah battery
- Works with your current Li-ion Chargers
- Longer run time and battery life
- Built in memory chip communicates the usage history with the charger
- Built in shock absorbers protect the cells from jobsite conditions
- High energy cells pack more power per cell to reduce number of cells and overall weight
- Large release button for easy removal from the tool
- Built in air vents and wall cools the battery cells evenly whilst blocking damaging debris
- 16 contact terminals provide consistent power and firm hold in any environment
DC18RC Battery Charger Features
- The DC18RC has a cooling fan and Active 3 Controls. This means that during the loading of the charging voltage, charging current, and temperature is held in the holes.
- The cooling system blows cool air into the battery. As a result, high temperatures occur in the battery, so that the battery life is extended, and the charging process is accelerated.
- When used in conjunction with charging adapter ADP03 this charger offers also the possibility of charging Ni-MH slide on batteries of 9.6V to 24V batteries or when used with charging adapter ADP04 this charger offers the possibility to charge Ni-Cd and Ni-MH rod and block batteries of 7.2V to 18V batteries
Compatible with the following battery models:
- BL1830, BL1430, BL3626, BL3622, BL1415, BL1013, BL0710
XGT wheeled Tools Bag Features
The Makita 83367-6 Wheeled Tool bag length of 700mm, width of 310mm and height of 320mm for any trades person wanting to transport their tools or accessories easily from job to job or store in the back of the van.
The tool bag made from hard wearing materials. Has 3 external pockets and a zipped opening, x2 carry handles for power tools and accessories.
Furthermore padded handle and removable shoulder straps for maximum comfort. Has wheeled bag for easy transporting.
- Double zipped opening
- Robust construction
- External Pockets
- A bright green outer lining for easy visibility
- Wheeled Base
- Diameters- 700mmx310mmx320mm
